Can I Change The Batteryin My Galaxy S6

How to change your Milky way S6 and Galaxy S6 Edge battery in 5 Steps

By ETrade Supply | April tenth, 2015 | | 29

Since Samsung has made the Galaxy S6 and S6 Edge with a not-removable battery, and with the battery capacity of these 2 batteries merely existence 2550 mAh and 2600 mAh, many people are wondering whether it's possible/how hard it is to supersede the S6 and S6 Edge's battery? Samsung has released official battery change instructions inside their manual (Check it here), simply this doesn't really give you an idea of how difficult the task is. Hither our detailed guide volition walk you step-past-stride through how to supplant the S6 and S6 Edge battery. Want to change the battery? Check our guide out first!

To supplant the Samsung Galaxy S6 battery:

Tools you need:

• Ejector Pivot Ten ane
• Heat Gun/Hair Dryer X 1
• Metallic Spudger Tool 10 1 (to pry upwards the battery)
• Phillips Screw Driver X 1 (PH00 i.five)
• Plastic Pry Tool X ane
• Suction Cup X 1

Step 1:

Close down your S6 first before you exercise anything else, and then apply the Ejector Pin to take out the SIM menu and SIM card tray.

Pace 2:

Use the Oestrus Gun/Hair Dryer to heat upward one finish of the S6 for about 1~ii mins (we start from the bottom), then use the Suction loving cup to pry upward the battery door a piffling bit and insert the Plastic Pry Tool (or playing cards) in. Take your time during this pace, the battery door adheres to the frame with some very strong adhesive; if it'south too difficult to pry upwards the bombardment door, try to use more than heat, not forcefulness; employ a thin plastic pry tool instead of a razor bract in order to avoid damaging the glass. Afterwards the Plastic Pry Tool has been inserted in, heat upwardly the edges then gently slide it around the edge to open up the battery door.

Footstep 3:

Undo the 13 screws around the middle plate, then estrus upwardly the front of the S6 to loosen the adhesive around the middle plate. Pry upward the screen assembly a footling bit with the help of a Suction Cup and thin Plastic Pry Tool, so slide the tool to separate the screen assembly (a little strength can be practical to the back of the battery, but not also much, handle carefully and gently)

Step 4:

Disconnect the 6 connectors that hold the motherboard every bit shown in the picture to release it.

Stride 5:

Use the Metal Spudger tool and insert information technology very, very carefully into the gap between the battery and screen associates to pry it up considering the battery adheres to the frail AMOLED display directly! (PLEASE NOTE: Do not heat upwardly the battery and do not bend the battery likewise much; patience is needed!)

After these steps, y'all could supervene upon the former battery with a new ane, and reassemble the Samsung Galaxy S6.

Want to replace the screen of Samsung Milky way S6, check our tutorial here!

Replacing the Samsung Milky way S6 and S6 edge battery is not an easy chore, we strongly do non recommend people who take no/less experience attempting this.

Summary

Reviewer

Weinstein

Review Date

2015-06-08

Reviewed Item

Thanks

Author Rating

v

Source: https://www.etradesupply.com/blog/how-to-change-your-galaxy-s6-and-s6-edge-battery-in-5-steps/

Posted by: fernandezberstionshe1988.blogspot.com

Share this post